16 bay rack
|
| 1TB useable RAID 14 bay 14 10K 74GB drives. SCSI 160 or FIBRE 1TB RAID 5 with hot spare |
$18877.00 |
| 1TB useable Enterprise level RAID. 1TB useable level 5 storage with hot spare. 14 74GB 10,000 RPM drives |
|
 |
1TB useable Enterprise level RAID.All RAID controllers are capable of 19,000 IO's per second. All systems are solid state back plane design. JES will provide Universal (80MHZ) interface cables to allow for higher speed SCSI buses.
System features
High performance
The G6322 controller delivers more than 18,000 IOPS and 180 Mbytes/sec making the controllers excel in transaction intensive environments such as OLTP, thanks to the powerful on board 266MHz Intel Pentium II CPU. The G6322 is ready for the full range of demanding environments from transaction intensive applications to data streaming backup operations and multimedia rich Internet.
The G6322 incorporates Chaparral's innovative RAIDEngine IITM memory controller. Featuring a state of the art 800 MBytes/sec PC-133 compatible memory interface and XOR RAID parity hardware, the RAIDEngine 11 is optimized for swift data transfers between host systems and hard disks.
-Unsurpassed Data Availability
The new G6322 controller offers high data availability for today's most demanding I/0 applications using dual controller host independent active-active failover. The G6322 active-activefailover design allows individual controllers to be taken off-line for firmware upgrade without interupting operations. This results in no downtime for maintenance operations, a key requirement for mission-critical applications.
-Advanced availability
Supporting RAID levels 0, 1, 0/1, 3, 4, 5, 10 and JBOD, Chaparral's RAID technology protects against loss of data. Additional features include:on-line capacity expansion, dedicated and pooled spares, battery backed ECC-protected disk cache, and hot-swap replacement of disk drives and controllers. Automatic failover initiation in G6322 controllers utilizes Chaparral's unique run-time diagnostics and error handling software.
The G-Series RAID Controllers' extensive feature set supports SAF-TE environmental monitoring with even notification via e-mail, pager, fax or automatic calls. Also included are event logging and SMART event monitoring.
-RAID specifications
-Processor and Data Rate
On-board CPU 233 Mhz, 32KBytes
L1 Cache 256 L2
Host/Device Bus Burst Data Rate: 160 MBytes/sec Ultra160
-----------------------------------------------
Host Interface
Number of Channels One or two single-ended or Ultra160 SCSIl
Protocol Ultra 160, Fast, Narrow, Wide, and Ultra2 SCSI
-----------------------------------------------
Device Interface
Number of Channels Three single-ended or Ultra 160 SCSI
Protocol Single Ended [Narrow (8-bit) or Wide (16-bit), Fast (10MHz), Ultra SCSI (20MHz)], or Ultra2 SCSI (40MHz), Ultra 160 (80MHZ)
-----------------------------------------------
Advanced RAID Features
On-line capacity expansion
Write back data cache memory bus 800MB/sec bandwidth
Host independant failover and failback
Spare pooling and dedicated spares
Array verification
Scheduled utilities with user defined priorities
Global hot-spare
Hot-swap devices
Array status monitoring
Adjustable stripe width
Automatic sector remapping transparent drive rebuild with user-settable priorities
Arrays can be configured for RAID levels 0,1,0/1, 3, 4, 5, JBOD
Write-through, Write-back, and Read-ahead cache options
-----------------------------------------------
Advanced Hardware Features
Up to 512 MBytes user-configurable, ECC Protected, non-volatile data cache memory
16 Mbyte local Extended Data Out (EDO) DRAM processor memory
Integrated Nickel Hydride (NiMH) cache battery backup
Flash upgradable firmware, 2 MByte
-----------------------------------------------
Advanced SCSI Features
Full backward SCSI compatibility
On-board termination, supporting auto multi-mode
70 simultaneous commands
Tagged command queuing
Disconnect/reconnect |
|